所订产品一般在 4天 内送达中国,具体时间取决于收货地点。
订单金额满 $100 USD免运费发送至中国。 所有少于 $100 USD的订单将收取$30 USD的运费。
按照《2010 年国际贸易术语解释通则》规定,如果预付并总算,则采用 CPT 结算方式;如果是同承运人结算,则采用 FCA Thief River Falls 结算方式
客户承担所有应缴纳的关税、经纪费等各项税费
针对合格机构和企业提供的信用帐户
电汇预付
更多来自全授权合作伙伴的产品
下单后,从合作伙伴发货平均需要时间 1-3 天,也可能产生额外运费。可能另外收取运费。 实际发货时间请留意产品详情页、购物车和结账页面上的说明。
国际贸易结算方式:CPT(交货时支付关税、海关费用和适用 VAT/应付税金)
有关详情,请访问帮助和支持
The TIDA-01063 is a reference design for current sensing using a PCB Rogowski coil sensor to achieve very good linearity for wide measurement range at a very low system BOM cost.
The uCurrent™ provides a solution for the problem of burden voltage on a multimeter. This little-known problem can be a real big issue, even on a "precision" 0.05% multimeter.
The ZXCT1008EV1 is a current monitor evaluation board which measures 0.5A, 2.0A or a 2.5A load current. This current is then translated to a proportional output current which is scaled by an external resistor to give a 2.5V full scale output voltage.
This application note describes the STEVAL-ISQ013V1, a demonstration board specifically designed for low-side current sensing with the TS507 operational amplifier.
This split-supply, high-side current sensing solution accurately detects load currents from 10 μA to 100 mA. The linear range of the differential voltage output is from -4.9V to +4.9 V. An instrumentation amplifier with pin-programmable gain was selected in order to measure the four-decade load current range.
所订产品一般在 4天 内送达中国,具体时间取决于收货地点。
订单金额满 $100 USD免运费发送至中国。 所有少于 $100 USD的订单将收取$30 USD的运费。
按照《2010 年国际贸易术语解释通则》规定,如果预付并总算,则采用 CPT 结算方式;如果是同承运人结算,则采用 FCA Thief River Falls 结算方式
客户承担所有应缴纳的关税、经纪费等各项税费
针对合格机构和企业提供的信用帐户
电汇预付
更多来自全授权合作伙伴的产品
下单后,从合作伙伴发货平均需要时间 1-3 天,也可能产生额外运费。可能另外收取运费。 实际发货时间请留意产品详情页、购物车和结账页面上的说明。
国际贸易结算方式:CPT(交货时支付关税、海关费用和适用 VAT/应付税金)
有关详情,请访问帮助和支持
谢谢!
敬请关注收件箱中的 DigiKey 新闻与更新!
请输入电子邮件地址